Wheat leaf with drops

Foliar sprays can be more efficient than feeding crops via the soil: they can be more targeted, cheaper, and less environmentally damaging than soil-mediated crop nutrition.   

But this is not always so: can foliar nutrition be made reliable ... to support sustainable crop nutrition?

Farms commonly use foliar nutrition, but how effective is it?  How should its performance be assessed?  What happens to the nutrients that are not absorbed?  

Foliar nutrition has been studied for many years. Now, with its potential to address many 21st-century nutritional issues, the challenge for this topic is to develop good, trustworthy evidence and guidance. 

Share your experiences and information here.  FarmPEP can help us to collate and coordinate data and trial results, positive or negative, for all to see.  Please get involved.

Foliar Nitrogen:

Farmers have used sprays of urea for many years to increase grain protein in wheat crops destined for milling and breadmaking.  Urea has limited solubility in water so products contain a maximum of 20 kg N per 100 litres.  These are normally applied during grain filling, with the milky ripe stage being regarded as optimal timing. Research has shown that 60 kg/ha N applied in this way increases grain protein by an average of 1% of grain DM e.g. from 12% to 13% protein in grain DM.  However, sprays at this time can cause scorch of the flag and lower leaves, and may reduce grain yield a little.  Practices aimed at reducing scorch are (i) product dilution (say from 20% to 10% N) and (ii) spraying at night (when transpiration is slowed).   

Foliar products (of urea and/or other N compounds) currently on the market include:

What other products are you using, being offered, or are offering?

The use of foliar N to replace conventional earlier soil-applied N (to support canopy expansion of cereals, oilseeds, and many other crops, including horticultural) has been the subject of research for many years. Often its performance has proved less consistent than soil-applied N.  However, some farms have recently been using foliar N sprays before grain filling and claiming that around 10 kg/ha foliar N can replace 40 kg/ha of conventional N, on the basis that they see no reduction in yield. Note that, to be convincing, such comparisons should include a treatment without either the foliar N or the extra conventional N, to show whether they were needed at all.  Experiences can be shared below.  The Farming Forum has an interesting discussion on this. 

Foliar Phosphorus:

Soil-applied phosphorus (P) is used with poor efficiency (less than 10%).  Most applied P, even if water-soluble, becomes chemically absorbed by the soil in a few weeks or months, and less available to the crop.  This results in a significant amount of P accumulating in topsoils and significant pollution of water courses with P in soil sediments. Additional concerns are the limited supply and volatile prices of phosphate fertilisers.  Conventionally, P applications are made to maintain an adequate level of soil P availability, as judged by soil analysis.  Fertiliser P or manure P is applied either once in the rotation e.g. before responsive crops like potatoes or maize, or annually, before the establishment of each crop.

Foliar application of P may provide a more efficient and accurate method of administering this nutrient to crops.  Foliar application of P comes with challenges due to limitations in the levels of P that can be applied in a single dose without scorching the leaf. Additionally, canopies are small early in crop growth when sufficient P is required to maximise a crop’s yield potential, making it difficult to apply enough fertiliser to the leaves. Also, P applied in this way enters the plant through the stomata and therefore it is important that plant water status and atmospheric conditions maintain stomatal opening after application.  However, there is promising potential in foliar application of P as it by-passes soil sorption process. Some researchers have suggested that a combined approach of seed dressings followed by foliar applications (to match the plant’s increasing demand for P later in the growing season) might be more efficient than a single soil application of P in terms of uptake rate and grain yield.

Some of the foliar P fertiliser products on the market include:

  • YaraVita range, liquid fertiliser products containing between 9-44% P2O5
  • Fosfol, 20% P2O5 and 8% Nitrogen, suitable for potatoes
  • Ilex Phosphite range, liquid fertiliser in which the P form is phosphite (PO3), containing between 2-42% P2O5 for a range of arable and vegetable crop types
  • Vivagro Vitelice P, 31% P2O5 foliar fertiliser also containing potash, magnesium, zinc, manganese, and copper
  • ICL Agroleaf Power range, NPK foliar fertilisers containing between 5 and 52% P2O5
  • Omex Folex P, 34% P2O5 foliar fertiliser
  • Omex Biostimulant range, 1-39% P2O5 and phosphite containing products

What other products are you using, being offered, or are offering?

Research is currently needed to determine the ability of foliar P products on the market to supply crops with sufficient P under different soil P indices, and to compare these to the standard approach of granular P fertiliser applied before or at sowing. What has your experience been with foliar P nutrition?

Read about Foliar Nutrition:

  • A thorough review of current international knowledge of foliar nutrition (144 pages) is published by the IFA here. Whilst it describes much that is known, it lists many vital issues that still remain uncertain or inadequately understood. The authors are Victoria Fernández (Technical University of Madrid), Thomas Sotiropoulos ('Demeter’ Pomology Institute, Greece) and Patrick Brown (University of California, Davis).   
  • A thorough review of crop nutrition with minor and micro-nutrients, including foliar applications, is published by AHDB here
  • AHDB last reviewed foliar nitrogen application for wheat in 2001 here 

Related Organisations

Content below is from across the PEP community and is not necessarily endorsed by Stewards or by PEP

Topic Comments

Discussion

I have been invited to present a paper on foliar nutrition (and grain analysis) to the IFS Agronomy Conference in December 2022, and would really like this to address everyone's current issues and recent results.  Please share them here, or let me know.  

2

Connected Content

Nitrogen is required annually by most crops (except pulses) to achieve yield and quality. Judging how much N to apply is a key part of nutrient management.

Biostimulants are increasingly available and are now widely marketed to farmers. While the jury is still out on a definitive definition, most definitions of biostimulants explain that they should stimulate plant nutrition processes independently of the product’s nutrient content with the aim of improving one or more of the following characteristics: nutrient efficiency, tolerance to abiotic stress, and/or quality.

Plants need around 12 essential mineral nutrients to grow: Nitrogen (N), Phosphorous (P), Potassium (K), Magnesium (Mg), Sulphur (S), Calcium (Ca), Iron (Fe), Manganese (Mn), Zinc (Zn), Copper (Cu), Boron (B) and Molybdenum (Mo).

ADAS are planning a Nutrition Challenge to compare the effect of different nutrition programmes on winter feed wheat yield, N uptake and gross margin, in the 2022/23 season. This is particularly timely following the recent dramatic rise in nitrogen fertiliser prices, which has forced the industry to re-examine nutrition strategies. Objectives of the project are to showcase good nutrition products and practices so that farmers are equipped and encouraged to use fertiliser better, for the benefit of the environment and their own gross margins.

Phosphorus (P) is an essential nutrient for both plants and animals, playing a key role in energy transfer as a major component of ATP. It is also vital in DNA. For full capture & conversion of solar energy, crop canopies need 30-40 kg/ha P. Crop species redistribute most of this P (~85%; more than for any other nutrient) to their seeds during canopy senescence, where it is stored as phytate. Plants appear to do this because, until their roots proliferate, plant seedlings are highly sensitive to P shortages.

Farmers, advisors and researchers working together to understand and improve crop nutrition on-farm

Analysing grain for all 12 nutrients can be an effective tool to improve nutrient management, providing information on crop nutrient status and nutrient offtakes.  It can indicate whether your crops are getting hold of the nutrients they need, or whether you can save on future fertiliser use.

Unium Bioscience is a company based on plant physiology, linking world class research with practical modern agriculture providing growers with hi-tech affordable ways to maximise crop production.  

Share information, knowledge, resources and experience on how we can improve crop perfomance (yield, quality and profitability) whilst reducing reliance on input, reducing impacts and improving environmental performance.

A range of products are commercially available that claim to enable more efficient nutrient uptake, allowing less nutrient to be applied as fertiliser.

Share your ideas and experience of how to improve nutrient efficiency and reduce dependence on artificial fertilisers

Our expertise in plant nutrition enables us to meet customer needs in crop health, efficiency and cost-effectiveness. Having been established for over 25 years, our bespoke range of products includes seed treatments, nutritional supplements, biostimulants and phosphites, which can be tailored to customer specifications. 

This review investigates the importance of non-NPKS nutrients within cereal and oilseed rape prod

To facilitate discussion at ACI European Mineral Fertiliser Summit

We help farmers grow naturally stronger plants, increase crop yields & immunity, and eliminate over-reliance on the use of harmful chemicals.   envirolizer® is a natural mineral plant growth enhancer and adaptogen.  It contains finely micronized and augmented natural calcite. Fully certified as organic input and fulfils the requirements of Demeter International as well as listed in the EU Input Lists. The farmers' ultimate solution for plant growth, made from 100% Natural Minerals.

As part of the AICC Crop Nutrition Club 2023, this on-farm winter wheat trial tested the effects of applying Nutrino Pro foliar N at T2 and T3. The trial was facilitated by a local AICC advisor, with support and Agronomics yield map analysis from ADAS.

Write whatever you want here - this is the main section. You can add links, add pictures and embed videos. To paste text from elsewhere use CTRL+Shift+V to paste without formatting. Add videos by selecting 'Full HTML' below, copying the 'embed html' from the source page (eg Youtube), clicking 'Source' above and pasting where you want the video to appear.
You can upload an image here. It can be jpg, jpeg, gif or png format.
Upload requirements

You can upload a file here, such as a pdf report, or MS Office documents, Excel spreadsheet or Powerpoint Slides.

Upload requirements
Authors Order
Add Authors here - you can only add them if they already exist on PEP. Just start writing their name then select to add it. To add multiple authors click the 'Add another item' button below.

Please ensure that you have proof-read your content. Pages are not edited further once submitted and will go live immediately.

Configure the meta tags below.

Use tokens to avoid redundant meta data and search engine penalization. For example, a 'keyword' value of "example" will be shown on all content using this configuration, whereas using the [node:field_keywords] automatically inserts the "keywords" values from the current entity (node, term, etc).

Browse available tokens.

Simple meta tags.

The text to display in the title bar of a visitor's web browser when they view this page. This meta tag may also be used as the title of the page when a visitor bookmarks or favorites this page, or as the page title in a search engine result. It is common to append '[site:name]' to the end of this, so the site's name is automatically added. It is recommended that the title is no greater than 55 - 65 characters long, including spaces.
A brief and concise summary of the page's content, preferably 150 characters or less. Where as the description meta tag may be used by search engines to display a snippet about the page in search results, the abstract tag may be used to archive a summary about the page. This meta tag is no longer supported by major search engines.

Meta tags that might not be needed by many sites.

Geo-spatial information in 'latitude; longitude' format, e.g. '50.167958; -97.133185'; see Wikipedia for details.
Geo-spatial information in 'latitude, longitude' format, e.g. '50.167958, -97.133185'; see Wikipedia for details.
Robots
A comma-separated list of keywords about the page. This meta tag is used as an indicator in Google News.
Highlight standout journalism on the web, especially for breaking news; used as an indicator in Google News. Warning: Don't abuse it, to be used a maximum of 7 times per calendar week!
This meta tag communicates with Google. There are currently two directives supported: 'nositelinkssearchbox' to not to show the sitelinks search box, and 'notranslate' to ask Google not to offer a translation of the page. Both options may be added, just separate them with a comma. See meta tags that Google understands for further details.
Used to rate content for audience appropriateness. This tag has little known influence on search engine rankings, but can be used by browsers, browser extensions, and apps. The most common options are general, mature, restricted, 14 years, safe for kids. If you follow the RTA Documentation you should enter RTA-5042-1996-1400-1577-RTA
Indicate to search engines and other page scrapers whether or not links should be followed. See the W3C specifications for further details.
Tell search engines when to index the page again. Very few search engines support this tag, it is more useful to use an XML Sitemap file.
Control when the browser's internal cache of the current page should expire. The date must to be an RFC-1123-compliant date string that is represented in Greenwich Mean Time (GMT), e.g. 'Thu, 01 Sep 2016 00:12:56 GMT'. Set to '0' to stop the page being cached entirely.

The Open Graph meta tags are used to control how Facebook, Pinterest, LinkedIn and other social networking sites interpret the site's content.

The Facebook Sharing Debugger lets you preview how your content will look when it's shared to Facebook and debug any issues with your Open Graph tags.

The URL of an image which should represent the content. The image must be at least 200 x 200 pixels in size; 600 x 316 pixels is a recommended minimum size, and for best results use an image least 1200 x 630 pixels in size. Supports PNG, JPEG and GIF formats. Should not be used if og:image:url is used. Note: if multiple images are added many services (e.g. Facebook) will default to the largest image, not specifically the first one. Multiple values may be used, separated by a comma. Note: Tokens that return multiple values will be handled automatically. This will be able to extract the URL from an image field if the field is configured properly.
The URL of an video which should represent the content. For best results use a source that is at least 1200 x 630 pixels in size, but at least 600 x 316 pixels is a recommended minimum. Object types supported include video.episode, video.movie, video.other, and video.tv_show. Multiple values may be used, separated by a comma. Note: Tokens that return multiple values will be handled automatically.
A alternative version of og:image and has exactly the same requirements; only one needs to be used. Multiple values may be used, separated by a comma. Note: Tokens that return multiple values will be handled automatically. This will be able to extract the URL from an image field if the field is configured properly.
The secure URL (HTTPS) of an image which should represent the content. The image must be at least 200 x 200 pixels in size; 600 x 316 pixels is a recommended minimum size, and for best results use an image least 1200 x 630 pixels in size. Supports PNG, JPEG and GIF formats. Multiple values may be used, separated by a comma. Note: Tokens that return multiple values will be handled automatically. This will be able to extract the URL from an image field if the field is configured properly. Any URLs which start with "http://" will be converted to "https://".
The type of image referenced above. Should be either 'image/gif' for a GIF image, 'image/jpeg' for a JPG/JPEG image, or 'image/png' for a PNG image. Note: there should be one value for each image, and having more than there are images may cause problems.
The date this content was last modified, with an optional time value. Needs to be in ISO 8601 format. Can be the same as the 'Article modification date' tag.
The date this content was last modified, with an optional time value. Needs to be in ISO 8601 format.
The date this content will expire, with an optional time value. Needs to be in ISO 8601 format.

A set of meta tags specially for controlling the summaries displayed when content is shared on Twitter.

Notes:
  • no other fields are required for a Summary card
  • Photo card requires the 'image' field
  • Media player card requires the 'title', 'description', 'media player URL', 'media player width', 'media player height' and 'image' fields,
  • Summary Card with Large Image card requires the 'Summary' field and the 'image' field,
  • Gallery Card requires all the 'Gallery Image' fields,
  • App Card requires the 'iPhone app ID' field, the 'iPad app ID' field and the 'Google Play app ID' field,
  • Product Card requires the 'description' field, the 'image' field, the 'Label 1' field, the 'Data 1' field, the 'Label 2' field and the 'Data 2' field.
A description that concisely summarizes the content of the page, as appropriate for presentation within a Tweet. Do not re-use the title text as the description, or use this field to describe the general services provided by the website. The string will be truncated, by Twitter, at the word to 200 characters.
By default Twitter tracks visitors when a tweet is embedded on a page using the official APIs. Setting this to 'on' will stop Twitter from tracking visitors.
The URL to a unique image representing the content of the page. Do not use a generic image such as your website logo, author photo, or other image that spans multiple pages. Images larger than 120x120px will be resized and cropped square based on longest dimension. Images smaller than 60x60px will not be shown. If the 'type' is set to Photo then the image must be at least 280x150px. This will be able to extract the URL from an image field if the field is configured properly.
The MIME type for the media contained in the stream URL, as defined by RFC 4337.